Menu
Schloetter UK
01386 552331

Filter Media

Cartridges & Filter Media for Plating Filter Pumps

Papers and Cloths

Filter Media Papers and Cloths

Schloetter offer a complete range of media for use with our disc filter units.

Available are polypropylene papers, polypropylene cloths, and activated carbon pads.

Product Details - Papers and Cloths

 

DescriptionMicronsNo. in PackProduct No.
Filter Papers
W.S.I. Filter Papers 195-60 10 100 255000
W.S.I. Filter Papers 203-32 10 100 255001
W.S.I. Filter Papers 470-60 10 100 255002
W.S.II. Filter Papers 195-60 20 100 255003
W.S.II. Filter Papers 203-32 20 100 255004
T.O. Filter Papers 195-60 5 100 255005
T.O. Filter Papers 203-32 5 100 255042
Filter Cloths
Polypropylene Filter Cloths 195-60   Single 255011
Polypropylene Filter Cloths 210-32   Single 255012
Polypropylene Filter Cloths 490-60   Single 255013
Polypropylene Filter Cloths 210-60   Single 255060
Polypropylene Filter Cloths 456-100   Single 255061
Carbon Pads
C1 Carbon Pads 195-60   25 255006
C1 Carbon Pads 205-34   25 25007
C1 Carbon Pads 470-60   25 255008
C2 Carbon Pads 456-100   100 255070

 


  

Cartridges

Filter Cartridges

 

Schloetter offer a complete range of cartridges for use with our filter units.

The following are available:

  • Standard Polypropylene Wound
  • Spun Bonded
  • L-Tech Pleated
  • Carbon Impregnated

 

Product Details - Cartridges:

Standard Poly Propylene Wound Cartridges (Pre-Washed)

The pre-washed polypropylene wound cartridge is made up of a synthetic fibre which is suitable for most plating solutions, especially organic acids / alkalis. Good results are also obtained in organic solvents.

The polypropylene is wound around a poly core in such a way to create hundreds of tapered layers giving excellent depth filtration.

Micron ratings vary from 1 - 200 microns, depending on the contaminant in the liquid, flow rate, etc.

Lengths available: 4" - 40" (please see chart below)
Max operating temperature: 70°C

 

SizeMicronProduct No.
4" 5 255101
5" 10 255102
10" 1 255103
10" 3 255104
10" 5 255105
10" 10 255106
10" 20 255108
10" 30 255109
10" 50 255110
20" 1 255111
20" 3 255112
20" 5 255113
20" 10 255114
20" 15 255115
20" 20 255116
20" 25 255150
20" 30 255117
20" 50 255118
30" 1 255119
30" 3 255120
30" 5 255121
30" 10 255122
30" 15 255123
30" 20 255124
30" 30 255125
30 50 255126
40" 10 255130

Spun Bonded Cartridges

The spun bonded cartridge is made up of a single material polypropylene which is highly resistant to most plating solutions, i.e. no resins, binders or lubricants, anti-static agents or other materials are used during the manufacture.

This coreless, self-supporting cartridge ensures easy disposal by incineration after use.

Spun bonded filters are recommended for use with flow rates in the region of 5 - 25 litres per minute per 10" cartridge length, ensuring maximum life of the filter can be obtained at lower flow rates.

The maximum operating temperature for spun bonded cartridges is 50°C

N.B. Users should ensure compliance with environmental and other regulations relating to the disposal of both the filter and the retained contaminant.

 

SizeMicronProduct No.
5" 1 255200
5" 3 255201
5" 5 255202
5" 10 255203
5" 20 255204
5" 50 255205
5" 75 255206
10" 1 255207
10" 3 255208
10" 5 255209
10" 10 255210
10" 20 255211
SizeMicronProduct No.
10" 50 25512
10" 75 255213
20" 1 255214
20" 3 255215
20" 5 255216
20" 10 255217
20" 20 255218
20" 50 255219
20" 75 255220
30" 1 255221
30" 3 255222
30" 5 225223

L-Tech Cartridges

L-Tech Filter Cartridge

L-Tech cartridges are designed to maximise the filtration area, being a very large single pleated cartridge. They are made from polypropylene, available in either 10 or 20 micron grade.

The cartridges greatly reduce the down-time in changing filter media (two minutes is typical) as it is only  necessary to change a single item.


DescriptionMicronProduct No.
Pleated cartridge Code 13-1001-02 10 255403
Pleated Cartridge Code 13-1001-01 20 255404

Carbon Cartridges

Schloetter's filter range includes two types of carbon powdered cartridges.

The carbon purification process is used whereby the liquid / solution to be purified is exposed to activated carbon. The purpose of this is to remove organics such as lubricant oils.

N.B. To adequately remove powdered carbon from solutions, 1 to 5 micron filtration is recommended.

Carbon reaction time is much faster with powdered carbon than with granular carbon.

DescriptionSizeProduct No.
Pre-washed activated carbon granules (113 gms) 10" 255401
Pre-washed activated carbon granules (225 gms) 20" 255402

 



Filter Selection Table

Carboy Pumps

MC4 / MC10 Filter Units

MC15 Single Filter Units

MC15 Double Filter Units

L Filter Units

Note: Specifications may change without prior notice.

 

 

 

Memberships and Accreditations:

       

Contact Numbers:
Telephone +44(0)1386 552331
   
Address:

Schloetter Co Ltd
Abbey Works
New Road
Pershore
Worcestershire, UK
WR10 1BY